24 FXS/FXO Ports
12 GSM/CDMA/WCDMA
24 E1/T1 with R2 MFC
24 E1/T1 with ISDN BRI/PRI
24 E1/T1 with SS7
12 E&M Module
12 Radio Over IP Module
G S M : 850/900/1800/1900MHz
C D M A : 800MHz
W C D M A : 850/900/1900/2100MHz
ISDN BRI/PRI/SS7
R2 MFC
FXS/FXO/E&M/Radio
Least Cost Routing
SOAP API, JASON/XML RPC
Support IMS/SIP/H.323
Modularized Hardware Structure
Specifications
Hardware Interfaces
Expansion Slots: 12
Expansion Boards:
2 FXS/FXO Ports per Board
1 GSM/CDMA/WCDMA slot per Board
2 E1/T1 with R2 MFC per Board
2 E1/T1 with ISDN BRI/PRI per Board
2 E1/T1 with SS7 per Board
1 E&M per Board
1 Radio per Board
Ethernet Interfaces:
2* 10/100 Base-T RJ45
Console:
1*RS232, 115200bps
LED Indicators:
Power, Run, Network and Line LEDs
VoIP
VoIP Protocols: SIP over UDP/TCP/TLS, H.323, SDP, RTP/SRTP
Voice Codecs: G.711A/U law, G.723, G.729A/B,iLBC,G.726,AMR
Voice Packet Capabilities: CNG, VAD, Jitter Buffer
Line Echo Cancellations: G.168 with 32, 64 or 128ms Tail Length
DTMF Mode: Signal/RFC2833/INBAND
QoS: L3 DIFFServ, ToS, 802.1p/q VLAN Tagging
Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
FAX: T.38 and Pass Through
NAT: STUN and Dynamic NAT
PSTN
BRI: 2B+D, NT or TE Programmable
PRI: 30B+D, NT or TE Programmable, ITU-T Q.921,
ITU-T Q.931,Q.sig
SS7: ITU, ITU-CHINA,ANSI
R2: R2 MFC with 23 variant standards
Physical Connector: RJ48 (120Ω)
Mobile
Frequency:
GSM: Quad-band 850/900/1800/1900MHz
CDMA: 800MHz
WCDMA: 850/900/1900/2100MHz
SIM/UIM Cards: 1 SIM/UIM per Port
SIM Interface: 1.8V, 3V
Antenna: Panel Mount or Extended Cable Antenna 3.0 dB,
SMA Connector
FXS/FXO
Connector: RJ11
Dialing Mode: Pulse Dialing and DTMF
Caller ID: Bellcore Type 1&2, ETSI, BT, NTT and DTMF based CID
Answering and Disconnect Signaling: Polarity Reversal for call connect/disconnect signaling
Maintenance
Web GUI: Configuration, Firmware Upgrade, RTP/Call
History Statistics
Diagnostics: Telnet/SSH, Syslog
Auto Provisioning: TFTP, HTTP, HTTPS, SNMP, TR069